Everlast PowerTIG 185DV
Welcome to Fab Supply & Co, your go-to source for high-quality welding consumables and New Zealand’s exclusive Everlast Welders distributor.
For the extra go anywhere capability, the Everlast PowerTIG185 DV delivers dual voltage capability that will enable you to operate virtually anywhere a power outlet is present. The digitally controlled IGBT inverter of PowerTIG 185DV delivers a smooth, steady arc, as good as any unit in it's class. The PowerTIG 185DV features both AC/DC TIG pulse welding capability along with a stick welding function. The TIG Pulse function is simple to control and use with 2 pre-programmed settings that offer the choice of operating at 1 pulse per second, or at 50 pulses per second. It's designed to be another "tool" in your tool kit when welding metal. When the welder is compared to similar products from Miller or Lincoln, the PowerTIG 185DV offers the widest range of adjustment, and the best duty cycle. The digitally controlled inverter retains the analog style input, making it a favorite for those users that like to "see" all their settings at a glance. This welder is perfect for pet projects around the shop, or a go anywhere portable unit you throw in the truck, when you don't know quite what to expect when you get to the jobsite.
- Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
- Now with Fan On Arc. This means the fans only run while welding or if an overheat condition occurs.
- Compact digitally controlled IGBT inverter
- Smooth, stable arc in AC and DC modes
- Simplified pre-set pulse mode with 1 or 50 Hz selection
- 5 Amp DC/20 Amp AC start
- Automatic Pre-flow
- Adjustable Down-slope control
- Adjustable Post flow time control
- Advanced Square wave output
- 2T/4T operation for torch switch control
- HV or Lift TIG start
- 150 Amp Stick function
- Adjustable AC frequency 20-250Hz
- Adjustable AC balance conttrol 10-90%, same as 250EX
- NOVA SuperFlex torch and NOVA pedal INCLUDED
- Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
- NOVA 17 series Rigid Neck Air-Cooled TIG Torch with 12.5 ft. ultra-flexible cables and 35 DINSE connector
- Torch Switch with 12.5 ft. cable and 7 Pin female style plug for 2T/4T operation
- Stick Electrode Holder with 10 ft. cable and 35 DINSE connector
- Ground Clamp with 10 ft. cable and 35 DINSE connector
- RH-191 Argon Regulator with Hose
- 6 ft. Input Power Cable with NEMA 6-50 plug
- 240/120V Pigtail Adapter
- Starter Consumable Kit (tungsten not included)
- NOVA Pedal TIG 7 Pin
- IGBT Type: Individual IGBT
- Inverter Type: Digital/Micro-controlled
- Output Type: AC/DC TIG, DC Stick
- Voltage/phase: DUAL VOLTAGE 120/240 1 PHASE
- Max Rated TIG Amps: 120V: 125A , 240V: 185A
- Max Rated Stick Amps: 120V: 100A, 240V: 150A
- TIG Amps @ Rated Duty Cycle:
- 120V: 125A/15V @ 35% Duty Cycle/ 40º C, 100A/14V @ 60% Duty Cycle/40º C 80A/13.2V @ 100% Duty Cycle/ 40º C
- 240V: 185A/17.4V @ 35% Duty Cycle/ 40º C, 145A/15.8V @ 60% Duty Cycle/40ºC 110A/14.4V @ 100% Duty Cycle/ 40º C
- Stick Amps @ Rated Duty Cycle:
- 120V: 100A/24V @ 35% Duty Cycle/ 40º C, 80A/23.2V @ 60% Duty Cycle/ 40º C 60A/22.4V @ 100% Duty Cycle/ 40º C
- 240V: 150A/26V @ 35% Duty Cycle/ 40º C, 120A/24.8V @ 60% Duty Cycle/ 40º C 90A/23.6V @ 100% Duty Cycle/ 40º C
- Max Inrush ( I1MAX ) Amps: 120V: 34A, 240V: 29A
- Maximum Rated (I1EFF ) Input Amps: 120V: 21A, 240V: 17A
- OCV: TIG: 74V, Stick: 74V
- TIG Output Range DC: 120V: 5A-125A 10.2V-15V 240V: 5A-185A/ 10.2V-17.4V
- TIG Output Range AC: 120V: 20-125A/10.8-15V 240V: 20-185A/10.8-17.4V
- Stick Ouput Range DC:
- DC:120V: 5A-100A/ 20.2V-24V, 240V: 5A-150A/20.2V-26V
- AC: 120V: 20A-100A/20.8V-24V, 240V: 20A-150A/20.8V-26V
- Stick Hot Start Amps: Auto regulated
- Stick Function: Auto Adaptive Arc Force Control
- Stick Hot Start Type: Auto Adaptive Hot Start
- 6010/Cellulose Capable: Limited to 6011
- Minimum Amp DC TIG Start: 5A
- Minimum Amp AC TIG Start: 20A
- TIG Start Type: Solid State HF and Lift Start
- HF and Lift: HV (Solid State HF Type, Lift Start with Remote
- Memory: No
- Start Amp Range: Fixed, Minimum
- End Amp Range: Fixed/minimum
- Upslope Time: Fixed, Minimum
- Down Slope Time: 0-10 Seconds
- Preflow time: Preset/Auto .3 Seconds
- Post Flow Time: 0-25 seconds
- TIG Pulse: Yes
- Standard DC Pulse Frequency: 1 or 50 Hz
- Standard AC Pulse Frequency: 1 or 50 Hz
- Pulse Time On (Duty Cycle): Fixed/Preset
- Pulse Amp Range: Fixed/Preset
- AC Frequency (Hz): 20-250Hz
- AC Balance Range: 10-90% of Positive
- AC Wave Forms: Advanced Square Wave
- Remote Control: 2T/4T
- Foot Pedal: Optional
- Weld steel to a maximum of 1/4" single pass (240V)
- Weld steel to a maximum of 3/16" single pass (120V)
- Weld steel to a maximum of 3/8" multi-pass(240V)
- Weld steel to a maximum of 5/16" multi-pass (120V)
- Weld aluminum to a maximum of 3/16" single pass (240V)
- Weld aluminum to a maximum of 1/8" single pass (120V)
- Weld aluminum to a maximum of 5/16" multi-pass (240V)
- Weld aluminum to a maximum of 3/16" multi-pass (120V)
- Weld to a minimum of .007" Steel (120V or 240V)
- Weld to a minimum of .025" Aluminum (120V or 240V)
- Stick weld with a 3/32" Electrode (depends on type and brand, may require a smaller electrode for some types, 120V)
- Stick weld with a 1/8" Electrode (depends on type and brand, 240V)
- This unit not rated for E6010 Stick use.
The max capability of all figures should not be the determining factor in your purchase. Duty Cycle and other factors can influence the practical limits of this machine.