Everlast Hatchet 60
Welcome to Fab Supply & Co, your go-to source for high-quality welding consumables and New Zealand’s exclusive Everlast Welders distributor.
Ready to chop up a bit of metal? The "Hatchet" is a no-nonsense type of cutter designed just for hand cutting that stands ready to accurately tackle common everyday chores in small shops and home garages. The small stature and light weight of the cutter indicates that this unit is designed to be a space saver. Add to that fact the 120/240V dual voltage operating capability of the machine, and you'll see that the unit is perfect for those needing to go portable for the racetrack, restaurants or even light HVAC work. For those needing more power and portability out on the jobsite, this unit will operate off any clean power (5% or less THD) generator capable of producing 10,000 Surge Watts of power.
Whether it's at the racetrack, home, work or out in the field on the farm, this unit will workday in and day out for you.
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- Cuts virtually any type of Metal
- Simple to use torches with inexpensive service parts and consumables
- Light Commercial class, 35% Duty cycle at 60 amps
- Clean, smooth cuts with the genuine iPT 60 Torch
- Blowback start starts are fast and reliable
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- Auto pilot arc restart and Auto post flow
- Front mounted pressure gauge
- Suitable for use with 10,000 W "clean power" (5% or less THD) generators
- IPT-60 Handheld Torch 14 ft. with Euro quick-connect central connector
- Ground Clamp with 25 Dinse connector
- Air Pressure Regulator/Water Trap (separate air dryer is required to reduce consumable wear and prevent torch damage)
- Consumable Starter Kit
- WEiPU SP21 CNC Connector 12 Pin
- Type: IGBT
- Voltage/phase: Dual Voltage 120/240 1 Phase
- Output Amp/Volt Range: 120V: 20-30A/ 88-92V, 240V: 20-60A/ 88-104V
- OCV: 300V
- Max Inrush (I1MAX) Amps: 120V: 36A, 240V: 41A
- Maximum Rated (I1EFF) Input Amps: 120V: 22A, 240V: 25A
- Duty Cycle at Rated Amps/Volts: 120V: 35% @ 30A rated @ 40° C
- 240V: 35% @ 60A rated @ 40° C
- Arc Start Type: Blow Back (Piston type)
- PilotArc: Yes
- Torch Type: IPT 60 (Innotec)
- CNC Interface Port: No
- Adjustable Post Flow Timer: No
- Gouging: Not Recommended
- Recommended Cutting Air Pressure: 65-72 PSI
- Recommended Compressor Capacity: 5.3 CFH @ 90 PSI/ 20-30 Gallon reserve
- OK-to-Cut Indicator/Low Air pressure safety: Yes
- Amps/Volts @ 60% Duty Cycle: 120V: 25A, 240V: 50A
- Amps/Volts @ 100% Duty Cycle: 120V: 20A, 240V: 40A
- Up to 9/16" daily use @ 15-20 ipm
- Up to 7/8" clean cut @ 8-12 ipm
- Up to 1+" severance cut @ 3-5 ipm
- Pierce up to 1/2"
Plasma cutting capacity is affected by several factors. Ideal cutting conditions require dry air, new consumables, proper air pressure, etc. Quality of cut depends upon consumable orifice size, standoff height, and travel speed.
PLEASE NOTE: To achieve the maximum performance out of your Everlast Machine please ensure your current breaker and wiring/socket setup at your place of use is sufficient enough to achieve this. For example, you may be required to upgrade your breaker to a 32A dedicated circuit to suit, therefore allowing you to achieve your machines full duty cycle. If in doubt, please contact your local licensed electrician for more info prior to purchasing and please see terms and conditions/warranty for more information.
Manufactured and compliant with IEC/AS 60974.10, CE Guaranteeing your electrical safety and performance. INDUSTRIAL USE ONLY